Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
What's new
Latest profile posts
-
T
~TABASCO~ wrote on Karl_T's profile.
Hello Sir,
Oil: My thought is, you don't get if you don't ask. Would you be interested in answering a few questions about the specifics so I dont mess up anything... I just want the best for the machine. I have an engineering back ground and extremely mechanical.... With a little guidance I can take off.... If you like, I can share phone, email, Etc.... Thank you - Jaxon
Oil: My thought is, you don't get if you don't ask. Would you be interested in answering a few questions about the specifics so I dont mess up anything... I just want the best for the machine. I have an engineering back ground and extremely mechanical.... With a little guidance I can take off.... If you like, I can share phone, email, Etc.... Thank you - Jaxon
-
O
Old_Eyes wrote on peterh5322's profile.
Hello Peter,
I am building my first RPC. I started from a pony motor design with no run or pf caps and converted it to a potential relay self starter. Though it is 7.5 hp, I am not having any trouble starting it because of the low current draw of the repulsion start motor. Would you mind taking a look at the attached balancing results and tell me what I might try next. The last line is the current configuration.
I am building my first RPC. I started from a pony motor design with no run or pf caps and converted it to a potential relay self starter. Though it is 7.5 hp, I am not having any trouble starting it because of the low current draw of the repulsion start motor. Would you mind taking a look at the attached balancing results and tell me what I might try next. The last line is the current configuration.
-
J
JA in NE wrote on SD&M's profile.
Hey. I've read some posts of yours in the past about there being a Slack group for Topsolid users. Is that group still active, and would you be able to add me to it? I've been using Top for about 6 years now programming a handful of 3 axis mills and a DMU50 doing primarily mold and die components. Awesome software, always finding new and better ways to do things with it. Thanks