Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
New profile posts
-
T
~TABASCO~ wrote on Karl_T's profile.
Hello Sir,
Oil: My thought is, you don't get if you don't ask. Would you be interested in answering a few questions about the specifics so I dont mess up anything... I just want the best for the machine. I have an engineering back ground and extremely mechanical.... With a little guidance I can take off.... If you like, I can share phone, email, Etc.... Thank you - Jaxon
Oil: My thought is, you don't get if you don't ask. Would you be interested in answering a few questions about the specifics so I dont mess up anything... I just want the best for the machine. I have an engineering back ground and extremely mechanical.... With a little guidance I can take off.... If you like, I can share phone, email, Etc.... Thank you - Jaxon
-
O
Old_Eyes wrote on peterh5322's profile.
Hello Peter,
I am building my first RPC. I started from a pony motor design with no run or pf caps and converted it to a potential relay self starter. Though it is 7.5 hp, I am not having any trouble starting it because of the low current draw of the repulsion start motor. Would you mind taking a look at the attached balancing results and tell me what I might try next. The last line is the current configuration.
I am building my first RPC. I started from a pony motor design with no run or pf caps and converted it to a potential relay self starter. Though it is 7.5 hp, I am not having any trouble starting it because of the low current draw of the repulsion start motor. Would you mind taking a look at the attached balancing results and tell me what I might try next. The last line is the current configuration.
-
J
JA in NE wrote on SD&M's profile.
Hey. I've read some posts of yours in the past about there being a Slack group for Topsolid users. Is that group still active, and would you be able to add me to it? I've been using Top for about 6 years now programming a handful of 3 axis mills and a DMU50 doing primarily mold and die components. Awesome software, always finding new and better ways to do things with it. Thanks
-
S
Soutie wrote on Olav's profile.
Hi Olav. My name is William and I have purchased a similar machine to yours. Did you manage to find a manual on the machine or perhaps you can help me? I need to know what voltage the electric clutches in the feed gearbox run at. The wiring in my machine had been stripped out.
Would appreciate any assistance.
Would appreciate any assistance.
-
G
Greek Hoplite wrote on daryl bane's profile.
-
B
bobst3r wrote on geomorphosis's profile.
It is at some level - e.g. there is a buyer, but he has been trying to arrange financing for the last 5 weeks (without a deposit). I'd need to give him a deadline (and request a deposit) before I'd be comfortable saying it's 100% available. Is there any questions about it that I can answer for you?
Thanks.
Bob
Thanks.
Bob
-
T
tmloos wrote on hendeyman's profile.
Hi Mr. HendeyMan...
I have a Hendey Norton 2B Univeral Milling Machine that came with a farm that I bought. The building that it is in collapsed and the machine needs to be restored. I really don't want to scrap this because I realize that it is very old and rare. Can you give me any advice how I can go about selling this to the right person?
Thanks for any help!
I have a Hendey Norton 2B Univeral Milling Machine that came with a farm that I bought. The building that it is in collapsed and the machine needs to be restored. I really don't want to scrap this because I realize that it is very old and rare. Can you give me any advice how I can go about selling this to the right person?
Thanks for any help!
Attachments
Hello Frank, I stumbled upon a post of yours about tool load monitoring. I would love to hear about your experience with CNC machine monitoring. My company is developing a tool wear monitoring system and your insights can help us in tailoring our solution for real-world needs! Not trying to sell anything, feel free to give me a call at 3054408780 or email industrial.ai.cnc@gmail.com
-
N
NayanJ wrote on ballen's profile.
Hi Ballen,
I recently bought Jones and Shipman 1310 Cylindrical grinding machine, but it was without manual. I am not sure about how to swing the wheel head in order to bring id grinding wheel up front. Can you help me? Also do you have the manual for the same machine and are okay to share it?
Thanks,
Nayan
I recently bought Jones and Shipman 1310 Cylindrical grinding machine, but it was without manual. I am not sure about how to swing the wheel head in order to bring id grinding wheel up front. Can you help me? Also do you have the manual for the same machine and are okay to share it?
Thanks,
Nayan
