Logan forward and reverse handle needed

[Cad1220]

To anyone that can help. Am looking for a forward and reverse handle with the spring for a logan lathe. It is a 11" model. I will post a pic as soon as I can get one.
Thanks,
Arnold

 

[Cad1220]

This is for the feed gears on the head of the lathe. 3 position lever, forward, neutral and reverse

 

[awander]

Did you try Logan?

 

[lazz]

It looks something like this...



If you visit Keith Ruckers Vintage machinery web site you can find several part manuals
Here is a parts list for a 820
On page 5 on the top you will see the part you are looking for.
Its called LA-4 Reverse Gear Assembly


A while back I cast the locking lever for the assembly you are looking for.The lathe was a model 820.
I do NOT have a complete assemble only the rough casting for a locking lever.
If you find the assembly with a broken or missing locking lever.
You can have the petrobond version on the left or the green sand version on the right for the cost of shipping.

 

[ToyFamily]

The part needed is for a Logan 955. It’s part # 1026 in the parts manual

-Nick

 

[awander]

I'll ask again-did you try direct from Logan?

 

[ToyFamily]

I’ll check there, I was clarifying the thread with more information as the helpful posts were going toward an 820.

 

[dalmatiangirl61]

Available on ebay, no relation to seller
https://www.ebay.com/itm/126467232111

Shop around, I just picked the first one that looked right, took about 3 minutes to find.